Here is a concise summary of the provided transcript:
**Title:** Harvesting Timber at Burn Peak
**Summary:**
* The narrator discusses the high cost of building wooden features at Burn Peak, a mountain bike trail system.
* To reduce costs, they aim to harvest and process timber from the surrounding woods.
* A makeshift skidding rig is built to transport logs from the woods to a trailer, using a Gator vehicle and winch.
* Initial attempts encounter setbacks, including bending the Gator's receiver due to excessive stress.
* The issue is temporarily resolved, and the timber is taken to a local sawmill for processing.
* The narrator reflects on the efficiency of this method, comparing it to using an Alaskan mill on-site.
* The sawmill visit showcases the traditional, low-tech processing method, yielding approximately 500-525 board feet of lumber for $210.
* The experiment is deemed successful, paving the way for future wooden feature builds at Burn Peak.
Here are the key facts extracted from the text, each with a number and in short sentences:
1. **Location**: The project is based at Burn Peak, which has mountain bike trails.
2. **Structure Cost**: A flight deck structure built in 2019 cost around $600.
3. **Cost Increase**: If built today, a similar structure would cost over $2,000.
4. **Wood Processing**: The team has an Alaskan mill for processing their own timber.
5. **Mill Limitation**: The Alaskan mill is time-consuming for processing large quantities of hardwoods like oak.
6. **Available Timber**: Burn Peak has many standing dead hardwoods, some naturally decay-resistant.
7. **Transportation Goal**: The team wants to transport large timber chunks from the mountain to a sawmill down the road.
8. **Gator Usage**: A "Gator" vehicle is used, with a plan to attach a rig for towing logs.
9. **Skidding Rig Plan**: The rig is designed to attach to the Gator's receiver, using a winch and skidding tongs to lift logs.
10. **Trailer Destination**: Logs are to be taken to a sawmill in a trailer.
11. **Excavator Rental**: The team is renting an excavator, which can be used to load timber into the trailer.
12. **Gator Limitation**: The Gator is rated for 130 pounds of tongue weight, which was exceeded, causing damage.
13. **Damage Repair**: The bent receiver on the Gator was repaired using the excavator and a ratchet strap.
14. **Timber Usage**: Timbers cut from branches are better used as support posts, while straight trunk sections are ideal for planking.
15. **Efficiency Test**: The process is being tested for efficiency compared to using the Alaskan mill on-site.
16. **Sawmill Details**: The used sawmill is old, has no modern electronics, and relies on mechanical components.
17. **Sawmill Operation**: The mill operates by rollers, chains, pulleys, gears, and conveyor belts serving the blade.
18. **Operator Expertise**: The mill operator, Audi, has years of experience optimizing plank yield from each timber.
19. **Waste Usage**: Waste wood is used for shims, mulch, firewood, or sawdust.
20. **Outcome**: Approximately 500-525 board feet of planks were produced, costing $210, proving the process efficient for their needs.
21. **Future Plans**: The team plans to continue this workflow, having established a new business relationship and stockpiled lumber.