The video showcases a DIY modern platform bed build with a floating nightstand, LED lighting, and a unique headboard design. The creator uses 8-inch lumber from a local hardware store and incorporates features such as:
* A 116-inch headboard with LED strips for ambiance
* Two floating nightstands with storage for lamps, books, and iPads
* An on/off switch for the undermount LED puck lights
* Electrical outlets with USB ports
The creator provides a detailed walkthrough of the build process, including:
* Preparing the lumber and sanding the wood
* Assembling the nightstands using dowels and clamps
* Installing the LED lighting and electrical wiring
* Attaching the headboard to the wall using 3-inch screws
* Securing the bed frame to the headboard using brackets and screws
The project took approximately one full day of work, with additional small spurts of work over several days. The creator is pleased with the final result and provides tips and recommendations for viewers who may attempt a similar project.
Here are the key facts from the text:
1. The platform bed was made from 8-inch lumber from a local hardware store.
2. The bed features two floating nightstands with space to store a lamp, book, iPad, and other items.
3. The bed has an electrical outlet with two ports to charge devices.
4. The bed has an on and off switch to control the undermount LED puck lights.
5. The headboard is 116 inches wide and has LED strips to set the mood in the room.
6. The bed is a temporary solution for the creator's bedroom.
7. The creator used a miter saw to cut the lumber for the project.
8. The creator used dowels to assemble the nightstands.
9. The nightstands have a removable top to allow for easy installation of the electrical components.
10. The creator used a terminal block to connect the low-voltage wiring.
11. The creator used a diagram to explain the wiring for the project.
12. The creator used a junction box to keep the high-voltage wiring organized.
13. The creator used a three-inch screw to secure the headboard to the wall.
14. The creator used thick brackets to attach the bed frame to the headboard.
15. The creator used corner brackets to secure the lip of the bed to the frame.
16. The creator used a mending plate to attach the bed frame to the headboard.
17. The creator used a quarter inch plywood as the bed's surface.
18. The project was completed in small spurts over several days.
19. The creator used a combination square to ensure accurate measurements.
20. The creator used L brackets to attach the support pieces to the bed frame.
21. The creator used a spray can to add a dark walnut stain to the wood.
22. The creator used a wipe-on polyurethane as a top coat for the finish.
23. The creator used a 400-grit sandpaper to sand the wood.
24. The creator used a continuity tester to ensure the wiring was correct.
25. The creator used a junction box to keep the wiring organized.
26. The creator used a terminal block to connect the low-voltage wiring.
27. The creator used a diagram to explain the wiring for the project.
28. The creator used a three-prong outlet with a USB port.
29. The creator used a transformer to power the LEDs.
30. The creator used a power cord to connect the transformer to the wall.