The video shows the process of building floating shelves with wireless LED lights for an office renovation. The creator, Brad, uses 3/4" birch plywood to make the shelves and a track saw to cut the pieces. He also uses a table saw to make precise cuts and a digital angle finder to set the blade to 46 degrees. After cutting and assembling the shelves, Brad adds a recess for the LED lights and uses a jig to make the cuts. He then adds a switch and a charging cable to make the LED lights completely wireless and rechargeable. Finally, he installs the shelves and tests the LED lights, which work perfectly.
1. The speaker, Brad, is building floating shelves with wireless LED lights for his office renovation.
2. He's using 3/4 inch birch plywood for the shelves.
3. The plywood sheets will be cut into two shelves each.
4. Brad is using a track saw to make the cuts.
5. He's making a folded miter box to create the shelves.
6. The miter box will have a top, bottom, front, and two sides.
7. Brad is using a bevel angle of 46 degrees for the cuts.
8. The bevel angle will create a tight outside corner and a gap on the inside.
9. The gap on the inside will be hidden and provide a place for glue squeeze-out.
10. Brad is using a table saw to make the length cuts.
11. He's using a digital angle finder to set the blade angle.
12. The angle finder is attached to the side of the table saw.
13. Brad is using filament tape to hold the shelves together while they dry.
14. The filament tape is more flexible and has a stronger adhesive than the original tape used.
15. Brad is using a USB battery pack to power the LED lights.
16. The LED lights are controlled by a remote control.
17. Brad is using a switch to turn the LED lights on and off.
18. The switch is necessary because the RF remote control is always listening and draining the battery.
19. Brad is using a charging cable to recharge the battery.
20. The battery is located inside the shelf.
21. Brad is using a six or seven foot level to ensure the shelves are level.
22. The shelves are installed using brackets.
23. The LED lights are installed inside the shelves.
24. The LED lights are controlled by a remote control and can be turned on and off.
25. The office renovation is part of a larger project.