This video is about disassembling an iPhone 11 Pro Max to explore its internal components. The process involves removing the screen, which is held in place by a strong adhesive and requires heat and a suction cup to loosen. Once the screen is removed, the internal components, including the motherboard, battery, and cameras, are revealed.
The video highlights the complexity of the iPhone's design, with many components held in place by screws, adhesives, and other fasteners. The narrator notes that while the iPhone is not necessarily difficult to repair, it is a complex process that requires care and attention to detail.
The video also highlights some of Apple's design choices, such as the use of recycled materials in the phone's components, including the solder connecting the circuits and the rare earth elements in the taptic engine. Additionally, the video notes that the iPhone's loudspeaker is designed to be water-resistant, with a special coating to prevent water from entering the speaker.
Overall, the video provides a detailed look at the internal components of the iPhone 11 Pro Max and highlights the complexity and attention to detail that goes into designing and building these devices.
Here are the key facts extracted from the text:
1. The iPhone 11 Pro Max has a stainless steel frame.
2. The phone uses proprietary pentalobe screws to hold the bottom of the screen in place.
3. The screws have black thread locker filling the gaps between the threads and the phone body to keep the screw in place and prevent water from entering.
4. The screen is held in place by adhesive surrounding the entire rectangle.
5. The battery has two connectors, one near the charging port and another at the bottom of the phone.
6. The motherboard is held in place by three screws and a standoff screw.
7. The phone uses 100% recycled tin in the solder connecting the circuits inside the motherboard.
8. The phone has a 3969 milliamp-hour capacity battery.
9. The loudspeaker is held in place by two screws and has a substantial amount of black adhesive to keep it in place.
10. The phone has been tested for water resistance to a depth of 4 meters for 30 minutes.
11. The charging port is held in place by nine screws.
12. The phone has a rating of IP68 for water and dust resistance.
13. The phone's back glass can be replaced, but it requires swapping over each component individually.
14. The phone uses recycled and recyclable materials.
Note: I excluded opinions and subjective statements from the extraction.