Chris Fix shares tips on starting a car that's been sitting for a long time. He demonstrates how to fix a sticking ignition with dry lubricant, checks for animal nests, and inspects fluids like oil and coolant. He changes the oil, fogs the cylinders for lubrication, drains old gas, and adds fresh fuel. Despite initial issues, he successfully starts the car with starter fluid, suggesting a possible fuel pump problem. The video is part of a series on building a drift car.
Here are the key facts from the text:
1. The car has been sitting for at least four to six months.
2. The Mustang was purchased from an online auction for a drift car project.
3. Before starting a car that's been sitting, it's important to check for potential damage.
4. A sticking ignition key can be fixed with dry lubricant spray.
5. Lint from pockets and unlubricated pins are common reasons for a sticking key.
6. Checking and changing engine oil is crucial before starting an engine that's been sitting.
7. The Mustang's engine oil was very low, prompting an oil change.
8. Fogging oil is used in cylinders to lubricate them before starting the engine.
9. Old gas was drained from the Mustang's tank and replaced with fresh gas.
10. The coolant level was checked and found to be adequately protected against freezing temperatures.
These facts cover the main points about preparing a car that has been sitting for a long time before attempting to start it, focusing on the Mustang used in the example.