The summary is:
The video is about how to install a PVC floor by Husky in a garage. The narrator shows the steps of preparing the floor, measuring and laying out the tiles, cutting and fitting the edges, and adding a trim kit. He also faces some challenges with draining and moving the hot water heater, and explains how he solved them. He ends by saying he is happy with the floor and will continue to work on the garage.
Here are some possible facts extracted from the text:
1. The text is a transcript of a video about installing a PVC floor by Husky in a garage.
2. The floor installation requires some prep work such as removing bolts, filling dips, and cleaning the floor.
3. The tiles have an interlocking system that can be hammered together with a rubber mallet.
4. The tiles need to be cut with a utility knife and a straight edge to fit the perimeter of the floor.
5. The hot water heater had to be drained and lifted to install the tiles under it, but the valve was clogged and had to be cleared with an air compressor.
6. The trim kit was installed with liquid nail to hide the edge of the tiles and the wall.