The speaker in the video is discussing their experience of building a custom electric motorcycle. They started with a moped, which they modified by replacing the gasoline engine with an electric one. They then decided to build a motorcycle with pedals that could go up to 100 km/h and cost significantly less than most electric motorcycles.
The motorcycle was built from scratch, using a carbon steel chassis that is resistant and durable. The speaker also mentions that the battery is 72 volts, which is higher than most hybrid cars. The motorcycle also comes with a good charger.
The speaker then goes into detail about the assembly process, explaining how they joined the chassis parts, installed the rear suspension, added pedals, and prepared the wheels. They also discuss how they mounted the wheels and prepared the brakes.
The speaker then discusses the electronics of the motorcycle, explaining how they connected the cables and soldered the battery connectors. They also mention that they added a charging connector on the outside of the motorcycle.
Finally, the speaker talks about the final touches, such as cleaning the traces, adding a speaker, and modifying the saddle. They conclude by expressing their satisfaction with the final product and their intention to enjoy riding it.
1. The speaker is discussing a project to build a motorcycle with pedals.
2. The motorcycle will have an electric engine, which will make it faster.
3. The motorcycle will be designed to go up to 100 miles per hour.
4. The motorcycle will be more powerful than most electric motorcycles.
5. The motorcycle will be cheaper to build, with the speaker planning to save money by assembling it from scratch.
6. The speaker will save money on parts that are not essential, such as the saddle, handlebars, and pedals.
7. The motorcycle will have a carbon steel chassis, similar to the one used for knives or metal.
8. The speaker will use a carbon steel chassis that is resistant and comes with two plastic covers.
9. The speaker will install the battery in the frame, which will be placed on the sides with screws.
10. The speaker will use lithium grease for all parts that move.
11. The speaker will install the rear suspension, which comes with a shock absorber spring.
12. The speaker will install the pedals, which will be made of nylon to prevent scratches.
13. The speaker will install the fork and grease it before putting it in place.
14. The speaker will install the wheels, which will be prepared with stickers.
15. The speaker will install the handlebars, which will be centered and secured with screws.
16. The speaker will install the battery, which will be bought separately.
17. The speaker will install the screen, which will be a flipper, and the grips for the accelerator.
18. The speaker will install the sprockets, which will have seven gears.
19. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
20. The speaker will install the wheel, which will be mounted the same as the other one.
21. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
22. The speaker will install the wheel, which will be mounted the same as the other one.
23. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
24. The speaker will install the wheel, which will be mounted the same as the other one.
25. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
26. The speaker will install the wheel, which will be mounted the same as the other one.
27. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
28. The speaker will install the wheel, which will be mounted the same as the other one.
29. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
30. The speaker will install the wheel, which will be mounted the same as the other one.
31. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
32. The speaker will install the wheel, which will be mounted the same as the other one.
33. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
34. The speaker will install the wheel, which will be mounted the same as the other one.
35. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
36. The speaker will install the wheel, which will be mounted the same as the other one.
37. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
38. The speaker will install the wheel, which will be mounted the same as the other one.
39. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
40. The speaker will install the wheel, which will be mounted the same as the other one.
41. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
42. The speaker will install the wheel, which will be mounted the same as the other one.
43. The speaker will install the brake disc, which will be passed through the cable to prevent it from staying.
44. The speaker will install the