The video provides a series of practical tips and life hacks. Here are the main points:
1. **Drilling holes**: The video demonstrates how to drill holes in a bolt and thread wires into them. The bolt is secured in a vice and two points are marked. The drill is then used to create two oblique holes in the bolt's head. The bolt is then placed in a screwdriver and the wires are threaded into the hole. The tip of the wires is cut off due to insulation.
2. **Splitting a watermelon**: The video shows how to quickly and simply split a watermelon into pieces for a large number of people. The top is cut off, and two perpendicular cuts are made through the whole watermelon. The watermelon is then cut into pieces until it runs out.
3. **Getting rid of mice**: The video suggests using cat hair to get rid of mice. The fur is collected and placed in a box. The smell of the cat hair is not very pleasant to mice, but when it burns, it emits a strong and unpleasant smell that drives the mice away.
4. **Removing metal chips**: The video explains how to remove metal chips that come out of a hole during drilling. The chips can be collected using magnets attached to the workpiece near the hole. The pieces of metal fall into a magnetic trap and stick to the magnets and the workpiece itself, making it easier to remove the chips.
5. **Buying items on AliExpress**: The video mentions that magnets can be bought on AliExpress for a couple of cents. The video also talks about the upcoming discounts on AliExpress and the triple cashback of up to 15 percent on orders from AliExpress through LeTyShops.
6. **Fixing a laminate**: The video provides a method to fix a gap in a laminate. A wooden block or a piece of board is used, along with a hot-melt glue gun. The glue is applied to the wood and then glued to one of the broken parts. The laminate boards are pressed well to get strong connections. A heavy hammer is used to hit the block in the side of the gap, narrowing it and joining the boards together.
7. **Finding small objects**: The video suggests using a flashlight to find small objects on the floor. The flashlight is placed at a sharp angle to the floor to provoke the formation of shadows that appear next to the object, making it easier to find.
8. **Fixing a cracked plastic product**: The video suggests using a regular paper clip to fix a cracked plastic product. The paper clip is bent into a straight line and then clamped using pliers to a regular nail to wrap the wire around its axis. The nail is then clamped in a vice and cut off its half using a small file. The pieces of plastic are then put together temporarily, fixed with something, and the wire ring is placed at the junction of the fragments. A regular soldering iron is used to fuse the circle with the head of the nail into the plastic, acting as a strong connector of its parts.
1. The video demonstrates how to insert a nail into a regular soldering iron.
2. The process of collecting cat hair is explained.
3. The method of shining a flashlight on a sewing needle is shown.
4. The video discusses the need to connect two thick wires.
5. The video provides instructions on how to make a good twist using a regular bolt, a vice, and a screwdriver.
6. The video demonstrates how to cut off the tip of a bolt due to insulation.
7. The video explains how to cut a watermelon into many pieces for a large number of people.
8. The video shows how to get rid of mice without the participation of a cat.
9. The video explains how to use magnets to collect metal chips after drilling.
10. The video provides information on purchasing magnets on AliExpress.
11. The video demonstrates how to fix a gap in a laminate using a wooden block, hot-melt glue, and a hammer.
12. The video shows how to attach an electrical cable to a wooden fence using plastic ties and a gun.
13. The video provides a method to find a small object on the floor using a flashlight.
14. The video demonstrates how to repair a cracked plastic product using a paper clip, pliers, a regular nail, and a soldering iron.
15. The video explains how to use a soldering iron to fuse a wire ring into a piece of plastic.