The video is a step-by-step guide to restoring an ancient ax that has lain dormant for centuries. The host begins by using a screwdriver to remove large pieces of rust from the ax. However, they encounter strong, deeply embedded rust that requires more aggressive methods.
The host then uses a small hammer and a hard file to further remove the rust. After successfully removing some rust, the host decides to treat the ax with vinegar to further dissolve the remaining rust. The ax is left in the vinegar solution overnight, and in the morning, the rust has not completely disappeared but the structure of the ax has weakened.
The host then uses a wire brush and water to remove the remaining rust. They also use a high-pressure washer to further clean the ax. The host then uses a grinder with an emery disc to shape the metal. However, the edge of the ax is disfigured by shells, so the host decides to cut off the damaged part and sand it with an emery wheel.
The host then uses a welding machine to fill the sink with metal, and uses a grinder to clean the area. They then use a small sharpening machine to give the metal a final shine. The host then secures the ax with a wooden handle, using glue and wedges to ensure the handle doesn't fly out.
Finally, the host tests the ax, demonstrating its functionality by splitting a log and a can of Coca-Cola. The host concludes that they have successfully restored the ax from its century-long slumber, giving it a new life.
1. The video attempts to restore an old ax that has been underground for hundreds of years, possibly used by ancient Vikings.
2. The ax has a thick layer of rust and several deep shells.
3. The rust removal process involves using a screwdriver, a small hammer, and a vice.
4. The rust is so strong that it's half clogged with a substance resembling cement.
5. The ax is filled with vinegar and left overnight to help fight the rust.
6. The vinegar didn't completely remove the rust but made it weaker.
7. A wire brush is used to remove the remaining rust.
8. The ax is then cleaned with a toothbrush and work is done delicately to avoid large scratches.
9. The ax has a number 3 clogged with rust.
10. The ax is filled with vinegar again for another night to clean the number.
11. The ax is processed and sanded with an emery wheel.
12. The ax has a sink at the end of the blade that spoils its appearance.
13. The sink is filled with metal using a welding machine.
14. The ax is polished using a special paste applied to a soft circle made of felt.
15. The handle is cut and reinforced with glue and wedges for a more secure grip.
16. The ax is impregnated with a wood protectant.
17. The ax is tested and seems to work well.