The creator of the video set out to build a terrarium coffee table three months ago, inspired by a live edge pine board. The design initially included a waterfall edge with actual running waterfall inside it. The process started with preparing and processing the boards, sanding them to remove unevenness and inconsistencies. The boards were then cut to the desired size and lightly sanded. The two flat surfaces allowed the creator to square off the ends of each board. The boards were then sanded properly and a non-toxic epoxy was applied for waterproofing. The creator then constructed the remainder of the table with reclaimed ¾" thick plywood, cut it into various sizes, and sanded them to remove the paint. The creator also drove countersink holes along the edges for screws and applied glue on the backside of these spots. The boards were then matched up and screwed together. The creator then applied epoxy to the corners and embedded fiberglass into it. The creator also applied epoxy to the other boards, but this one is clear. The creator then used a heat gun to remove air bubbles while it was still wet. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then applied epoxy to the other boards, but this one is clear. The creator then
1. The project began three months ago with the aim to build a terrarium coffee table.
2. The initial inspiration for the project was a live edge pine board, but it was found to be cupped and unsuitable for the design.
3. The edges of the board were full of undesirable debris, which was removed with a wire brush.
4. The design consists of two parallel slabs with their live edges in the middle.
5. The thickness of the board was checked to get a baseline and to ensure any unevenness was removed.
6. The boards were processed and sanded, and the edges were squared off.
7. The cut was fixed using reclaimed ¾" thick plywood, which was cut into various sizes and sanded to remove the paint.
8. Countersink holes were driven along the edges for screws, and a thin board was attached along the top to fill a gap.
9. The interior of the terrarium was waterproofed with a non-toxic epoxy.
10. The sides of the terrarium were made too short, and an easy fix was made by attaching a thin board along the top.
11. The water will fill the top compartment and overflow in front, framed by the live edge.
12. The interior of the terrarium was waterproofed with a non-toxic epoxy.
13. The terrarium was constructed with various plants, including Java Moss and Anubias, and a pump was installed for water circulation.
14. The design choice took advantage of the live edge boards, which transition into a waterfall edge.
15. The plants were selected intentionally to thrive in minimal light conditions.
16. The terrarium was completed with color-changing lights, which took the design to the next level.
17. The terrarium coffee table is intended to work and add a level of functional ambiance to the owner's office and hangout space.
18. The design is one of the most intricate projects created by the channel and is dedicated to creating beautiful and functional pieces of nature art.
Please note that these are the key facts extracted from the text and they do not include any opinions.