Here is a concise summary of the modern outdoor sofa build:
**Project:** Modern Outdoor Sofa Build
**Materials:** Western Red Cedar (2x4s, 1x4s)
**Tools:** Miter saw, drill press, table saw, dado blade, drill, etc.
**Key Steps:**
1. **Armrests:** Cut and assemble 2x4 frames with 3/8" screws and cedar plugs.
2. **Base:** Create a stretcher and attach to armrests for stability.
3. **Seat Base:** Build frame with notched inner supports and attach 1x4 slats.
4. **Seat Back:** Cut 2x4 uprights with 15° angles, notch, and attach 1x4 slats.
5. **Assembly:** Combine all parts, sand, and apply exterior-grade spar urethane.
6. **Finishing Touches:** Add rubber feet and upholstered cushions (sewing process not detailed in the video).
**Outcome:** A sturdy, modern outdoor sofa with a comfortable 15° angled back, ready for outdoor use. **Plans available on the creator's website.**
Here are the key facts extracted from the text, each with a number and kept as short sentences:
**Project Details**
1. The project is building a modern outdoor sofa.
2. The sofa is made from exterior wood, specifically cedar.
3. Cedar was chosen because it comes in various colors (from dark to light).
**Materials and Tools**
4. Materials used include 2x4 cedar boards, 1x4 cedar boards, and exterior-grade spar urethane.
5. Tools used include a miter saw, drill press, plug cutter, table saw, dado blade, circular saw, and a shop-made taper jig.
6. Spax HCR X exterior screws were used for assembly, sponsored by Spax.
**Construction Process**
7. The project started with sorting 2x4s for matching colors.
8. Armrest assemblies were made using 8 parts, glued and screwed together.
9. Cedar plugs were used to fill screw holes for a neat finish.
10. A base stretcher was added for stability, attached with 2.5" screws.
11. The seat base consists of a frame with inner supports and 1x4 slats.
12. Notches for slats were cut using a dado blade on a table saw.
13. The seat back was made from 2x4s with 15-degree angled uprights and 1x4 slats.
14. A taper was added to the back of the uprights for a sleek look.
15. All parts were sanded to 150 grit before assembly.
16. Three coats of exterior-grade spar urethane were applied before final assembly.
**Assembly and Finishing**
17. Rubber feet were attached to the bottom to minimize water contact.
18. The sofa was assembled using clamps and screws (2.75" and 1.5" screws).
19. Upholstered cushions were planned to be added, made by the creator's wife.
**Additional Resources**
20. Plans for the modern outdoor sofa are available on the creator's website.
21. A playlist for outdoor patio furniture builds is mentioned for future content.