Here is a concise summary of the provided text, which appears to be a transcript of a video tutorial on cutting a kurti (a traditional Indian garment):
**Title:** Cutting a Kurti: Neck, Sleeve, and Common Hole
**Summary:**
* **Initial Steps:**
+ Fold fabric four times for cutting front and back together
+ Mark a straight line at the top and a point 7.5 inches below for the common hole and chest
* **Cutting:**
1. **Common Hole (Front & Back):** Mark and cut using measurements (7 inches for sleeveless, 8 inches for short sleeve)
2. **Nick (Front & Back):** Mark width (3 inches) and depth (6.5 inches for front, 8.5 inches for back); cut a rounded nick
3. **Sleeves (Half Sleeves):**
- Fold fabric four times; mark length (8 inches) and common hole (using chest size ÷ 5 formula)
- Mark and cut sleeve shape, including a separate common hole for the sleeve front (1/2 inch from the top)
**Outcome:** Completion of cutting the kurti's common hole, neck, and sleeves.
Here are the key facts extracted from the text, keeping each fact as a short sentence and assigning a number to each:
**Fabric and Kurti Preparation**
1. The fabric for the kurti is folded on four sides for cutting.
2. The front and back of the kurti are cut together.
**Common Hole and Chest Marking**
3. A straight line is marked on top of the fabric for alignment.
4. A mark is made 7 1/2 inches below the top line for the common hole and chest.
5. An additional 1/2 inch is added for the back common hole marking.
**Nick (Depth of Kurti) Marking**
6. For a short nick, the marking is done at 8 inches.
7. For a sleeveless kurti, the marking is done at 7 inches.
8. The standard size for a deep nick is 6 1/2 inches (total tiara being 13 inches).
**Cutting Process**
9. The common hole for the front is cut 1/2 inch less from the top marking.
10. The front and back are separated after cutting the common hole.
11. The nick is cut along with the marking, with different depths for front and back.
**Sleeve Cutting**
12. Sleeves are cut with the fabric folded on four sides, front and back together.
13. The sleeve length is marked (example: 8 inches from the top).
14. A standard mark for the sleeve common hole is 3 inches from the top for standard sizes.
15. For smaller sizes, this mark can be 2 inches.
16. The sleeve common hole size is determined by dividing the chest size by 5 (example: 40 inches chest = 8 inches marking).
**Specific Measurements**
17. The width of the nick is 3 inches.
18. The total width for the nick area is 6 inches.
19. The depth of the front nick is 6 1/2 inches, and the back nick is 8 1/2 inches.
20. An additional 1/2 inch is added for the front common hole on the sleeve from the standard marking.