Here is a concise summary of the provided transcript, which appears to be a step-by-step guide on sewing a palazzo pant with a pocket:
**Project:** Sewing a Palazzo Pant with Pocket
**Fabric:** 2.25 meters of cotton fabric
**Key Steps:**
1. **Fabric Preparation**: Fold fabric lengthwise, open side out.
2. **Marking Measurements**:
* Belt line: 2 inches from top
* Pant length: 6.5 inches (plus 0.5-inch stitch margin)
* Hip and seat measurements: based on individual measurements (detailed in transcript)
3. **Cutting**:
* Front and back parts (with adjustments for back part to ensure comfort)
* Pocket piece (12 inches x 14 inches)
4. **Sewing**:
* Sew front part, creating pocket with 6-inch opening
* Sew back part, then join to front part at sides and bottom
5. **Finishing Touches**:
* Create belt with elastic, folding and stitching in place
* Attach hemming strip at bottom (6 inches wide, folded and stitched)
Here are the key facts extracted from the text, keeping each fact as a short sentence and numbered for reference:
**Fabric and Measurements**
1. **Fabric quantity**: 2.25 meters of cotton fabric is used for making the palazzo pant.
2. **Initial fabric fold**: The fabric is folded lengthwise, creating an open side and a joined side.
3. **Belt mark**: A mark is made 2 inches from the top for the belt.
4. **Pant length mark**: 6.5 inches (plus 0.5-inch stitch margin) is marked for the pant length, totaling 7 inches.
5. **Hip measurement calculation**: One-fourth of the hip measurement (38 inches) plus 1 inch is used, resulting in 10.5 inches.
6. **Seat mark**: 11 inches is marked for the seat, based on the hip measurement plus 2 inches.
7. **Bottom mark**: The center of the line is found, and 6.5 inches is marked from the seat mark for the bottom.
**Cutting**
8. **Front part cutting**: The front part is cut based on the marked measurements.
9. **Back part cutting**: The back part is cut with an additional 2 inches at the top and 2.5 inches at the seat side for comfort.
10. **Pocket fabric**: A separate fabric piece of 12 inches (length) and 14 inches (width) is used for the pocket.
11. **Pocket cutting**: The pocket is cut with a slight curve shape from the open side.
**Stitching**
12. **Seat stitching**: The seat is stitched first, with the straight sides of both parts inside.
13. **Pocket stitching**: The pocket is stitched with a 6-inch gap, starting from 3 inches below the top.
14. **Back and front part stitching**: Both parts are joined equally, with the sides inside, and stitched from the bottom up.
15. **Belt stitching**: The belt is folded, pressed, and stitched with a kinnar along the entire length.
16. **Elastic insertion**: A 2-inch opening is left for inserting the elastic, which is then stitched in place.
17. **Hemming**: A 6-inch wide strip is folded and stitched at the bottom for hemming.
**Final Assembly**
18. **Final stitching**: All parts are stitched together, ensuring equal adjustments on both sides.
19. **Comfort feature**: The design allows for comfort while sitting and standing due to the additional material in the back part.