Here is a concise summary of the provided text, which appears to be a transcript of a DIY sewing video:
**Project:** Sewing a Straight Pant with Elastic Waist and Loops
**Fabric:** 2.25 meters long, double-folded for width
**Key Steps:**
1. **Cutting:**
* Cut front and back parts with 2-inch margins
* Back part: increase by 2 inches on crotch side and sides
2. **Stitching:**
* Stitch seat and center of both parts (inside out)
* Leave 5-inch openings on sides for loops
* Stitch sides, leaving 2-inch margin at bottom
3. **Loops and Button:**
* Create loops on back part using 2.5-inch string pieces
* Attach button in front of loop
4. **Belt (Elastic Waist):**
* Fold and stitch 2-inch margin at top
* Insert elastic (2 inches more than waist size)
5. **Final Steps:**
* Stitch openings and stretch fabric to complete the pant
**Video Cues:**
* Like and subscribe if you found the video helpful.
Here are the key facts extracted from the text, without opinions, with each fact numbered and in short sentences:
**Fabric and Measurements**
1. The project uses 2.25 meters of fabric in length.
2. The fabric is initially folded in half for cutting.
3. The width of the fabric is not explicitly stated but is used in its double-folded state for measurements.
**Cutting the Front Part**
4. The front part is cut first, with a 2-inch margin at the top for the belt.
5. A straight line is drawn 2 inches from the top for the belt.
6. The waist measurement is taken, with the example using a waist size that, when divided by 4 and added with 1 inch of looseness, equals 10 inches.
7. The crotch length is determined by dividing the waist size by 4 and then adding 3 inches (example: 9 inches + 3 inches = 12 inches).
**Cutting the Back Part**
8. The back part is cut with an additional 2 inches at the crotch side and 2 inches on the sides compared to the front part.
9. The top of the back part also has an extra 2 inches for comfort while sitting and standing.
**Stitching and Assembly**
10. The straight sides of both parts are stitched together with the straight sides facing inwards.
11. The center is stitched first, followed by the sides.
12. A 2-inch margin at the bottom is used for folding.
13. Button loops are placed 5 inches from the outside on both sides, with a 2-inch band left at the top.
14. Loops are only applied to the back part, starting from the bottom up, with a half-inch gap between them.
**Loop and Button Placement**
15. The loops are placed on the inside of the back part, and buttons are stitched on the outside, in front of the loops.
**Belt and Final Assembly**
16. The belt is made from the remaining fabric, using the leftover 2-inch margin.
17. The elastic waistband is cut 2 inches longer than the waist size.
18. The elastic is inserted through a small opening left in the stitching, then overlapped and stitched in place.
**Miscellaneous**
19. The project allows for adjustments based on individual size, with examples given for different sizes (big, medium, with adjustments for a comfortable fit).
20. The final product is a pair of pants with an elastic waistband and button-loop closure.