Here is a concise summary of the provided text:
**Title:** Creating a Custom Pikachu Figure with a 3D Pen
**Creator:** Sanago, a self-proclaimed "Pokémon Master" and YouTuber
**Motivation:** Unable to purchase a re-released Pokémon Bread due to its popularity, Sanago decides to create a custom Pikachu figure instead.
**Process:**
1. Sketching Pikachu with a 3D pen
2. Building and shaping the figure using filament, heat, and hand tools
3. Refining details (e.g., face, hands, feet, tail)
4. Adding LED lighting to simulate electricity
5. Crafting a wooden pedestal
6. Painting and finishing the figure
**Result:** A highly detailed, custom Pikachu figure with illuminated cheeks, showcased on a wooden pedestal.
**Conclusion:** Sanago invites viewers to share their favorite Pokémon, hints at future projects, and promotes their online shop for 3D pen purchases.
Here are the key facts extracted from the text, keeping each fact as a short sentence and excluding opinions:
1. The creator's username is Sanago, and they claim to be a Pokémon Master.
2. Sanago attempted to buy Pokémon Bread but couldn't due to high demand.
3. Sanago found a Charmander bread by luck, but it wasn't their desired Pikachu bread.
4. Inside the Charmander bread, Sanago found a Psyduck seal sticker.
5. Sanago decided to create their own Pikachu figure instead of buying bread.
6. The creation process involved using a 3D pen to trace a sketch.
7. The 3D pen was used to build bridges to make the sketch three-dimensional.
8. Green filament was used for visibility on camera.
9. A lighter was used to melt and bend the filament into shape.
10. A grinder was used to sand the surface of the figure.
11. A soldering iron was used to smoothen areas inaccessible to the grinder.
12. Pikachu's tail stores electrical energy, according to Pokémon lore.
13. A flexible LED wire was used for the figure's lighting.
14. An acrylic tube from a stationery store was used to represent electricity.
15. The tube was bent using heat to achieve the desired shape.
16. A pedestal was made from white oak wood for the figure.
17. A brass tube was used to connect the LED wiring through the pedestal.
18. The figure's head was detached and reattached during the detailing process.
19. Primer and paint were applied to the figure, with masking used for details.
20. The final figure features a lightning-shaped LED in its cheeks.