Here is a concise summary of the provided transcript:
**Project:** Creating a Pan Trouser with a Design at the Bottom
**Fabric and Measurements:**
* 2.25 meters of fabric (specified length and width)
* Waist measurement: divided by 2, added 2 inches margin (e.g., 30" waist -> 16" + 2" = 18")
* Hip measurement: similarly calculated with adjustments for the back piece
**Steps:**
1. **Cutting:**
* Front piece: marked with 2" belt margin, straight line, and length (37" - 3" = 34")
* Back piece: marked with extra 2" margin on top and seat side, similar length and bottom adjustments
2. **Stitching:**
* Seat stitching (front and back pieces)
* Sides stitching (joining front and back, with front piece's straight side inside)
* Design at the bottom:
+ Folding and stitching a 1.5" clove strip
+ Creating a pattern with a 3" piece (folded, stitched, and turned)
+ Attaching a 1" strip to the pattern
3. **Finishing:**
* Removing paper pattern
* Double-folding and stitching the strip
* Center stitching
* Creating and attaching the belt with elastic (waist size + 3")
Here are the key facts extracted from the text, numbered and in short sentences:
**Fabric and Measurements**
1. Fabric length used: 2.25 meters
2. Fabric width used: Not specified, but shown in the content
3. Waist measurement addition: +2 inches margin
4. Hip size calculation: Divide by 3604, add 9 inches + 2 inches margin
5. Resulting waist/hip measurement for the pattern: 11 inches
**Cutting the Front Part**
6. Leave 2 inches for the belt at the top
7. Front part length: 37 inches minus 3 inches (pattern requirement) = 34 inches
8. Mark 11 inches for the waist (as calculated)
**Cutting the Back Part**
9. Fabric kept in double fold for the back part
10. Extra 2 inches margin at the top for the back part
11. Extra 2 inches on the seat side for comfort while sitting
**Stitching and Design**
12. Clove strip width used for design: 1.5 inches
13. Strip folding and stitching method used for the design
14. Bottom design pattern involves folding, stitching, and turning over
15. Paper pattern used for the bottom design is 13 inches long
16. Design involves stitching in a cross pattern
**Assembly and Finishing**
17. Straight sides of front and back parts stitched together
18. Edges joined and stitched on both sides
19. One-inch strip attached to the bottom for finishing
20. Elastic length for the belt: 3 inches more than the waist size (e.g., 30 inches waist + 3 inches)
21. Elastic insertion method involves stretching, overlapping, and stitching.