Here is a concise summary of the provided text, which appears to be a transcript of a sewing tutorial for an Angrakha pattern umbrella cut kurti:
**Project:** Angrakha Pattern Umbrella Cut Kurti
**Fabric:** 3 meters of cotton fabric
**Summary of Steps:**
1. **Cutting:**
* Cut top part: front and back pieces with armholes, neckline, and Angrakha pattern
* Cut sleeves: 15" length, folded and cut to shape
* Cut bottom part: folded into a triangle, cut to shape with 35" length
2. **Stitching:**
* Prepare front part: attach oblique strips to edges
* Overlap and stitch right and left parts together
* Add potli buttons
* Prepare back part: attach strip to back neck, then attach to front at shoulders
* Stitch sleeves and attach to armholes
* Attach bottom part to top, folding and stitching in place
**Key Features:**
* Angrakha pattern on front piece
* Umbrella cut design
* Potli buttons for closure
* Double-folded bottom hem
Here are the key facts extracted from the text, each with a number and in short sentences, excluding opinions:
**Fabric and Measurements**
1. The project uses 3 meters of cotton fabric.
2. The length of the top pattern is 14.5 inches.
3. The armhole measurement is 6.5 inches.
4. The chest measurement (1/4 of the chest plus 2-inch margin) is 11 inches.
5. The waist measurement (1/4 of the waist plus 2-inch margin) is 9 inches.
6. The sleeve length is 15 inches.
7. The bottom part length is 35 inches.
**Cutting Process**
8. The back neck and back armhole are cut first.
9. The front neck and front armhole are cut separately.
10. The Angrakha pattern is drawn on the front part after cutting.
11. A 1-inch mark is made from the left side of the center.
12. The sleeve pattern requires a 5-inch mark from the armhole.
13. The bottom part is cut after folding the fabric into a triangle.
**Stitching Process**
14. A crushed strip is used for stitching the front part.
15. The strip is attached upside down on the edge of the front part.
16. Small cuts are made, and the strip is folded inward after stitching.
17. The top part is attached after overlapping the right part on the left.
18. Potli buttons are added with a small gap.
19. The back part is stitched using a similar process.
20. A special strip (2.5 inches wide, 7 inches long) is used for the flip pattern.
**Assembly**
21. The front and back parts are attached at the shoulder.
22. The sleeves are added, and potli buttons are stitched inside.
23. The bottom part is attached to both the top and back parts.
24. The garment is turned upside down, and the bottom is double-folded.