Matt Montgomery from Modern Builds shares a DIY project where he builds a mid-century modern sofa from scratch. Here's a concise summary of the project:
1. Matt outsourced the upholstery of the cushions to a local shop, providing them with the dimensions he needed.
2. He built the platform for the sofa using six 2x6 boards, measuring and cutting them to size, and then assembling them using biscuit joints.
3. He created a back support system using leftover 2x6 boards, cutting half-lap joints for the first time, and attaching them to the platform using dowels.
4. Initially, Matt used table legs that were not stable enough, but after cutting them to a shorter length, they became sturdy and looked more custom.
5. He applied a Danish oil finish with a built-in dark walnut stain to the sofa frame, which soaks into the wood and gives it a natural look.
6. Once the finish was complete, Matt attached the cushions to the sofa, and it was ready for use.
7. The sofa also has a hidden feature - it can be converted into a twin-sized sleeper sofa by removing the back cushions.
Overall, Matt's project shows that with some creativity and resourcefulness, it's possible to create a stylish and functional piece of furniture like a mid-century modern sofa.
Here are the key facts extracted from the text:
1. The speaker, Matt Montgomery, is a DIY expert who built a mid-century modern sofa.
2. Matt is from Oklahoma City.
3. Matt purchased the cushions for the sofa from an upholstery shop.
4. The cushions were made to Matt's dimensions and were ready in about four days.
5. Matt recommends getting the cushions first and then building the platform to fit them.
6. Matt used 2x6 boards for the platform and measured them about 3-4 inches oversized.
7. Matt cut the boards to size using a table saw and biscuit joiner.
8. Matt used epoxy to fill in cracks and imperfections in the wood.
9. Matt used a belt sander to flatten the wood and did not need to use a planer.
10. Matt used a circular saw to cut the platform to size.
11. Matt built a back support using leftover 2x6 boards and attached it to the platform using dowels.
12. Matt cut half-lap joints for the first time on this project.
13. Matt used a drill press and dowels to attach the back support to the platform.
14. Matt sanded the entire project up to 220 grit.
15. Matt used table legs as the legs for the sofa, but had to modify them to make them more stable.
16. Matt cut the legs off at a certain length to prevent them from pivoting.
17. Matt used Danish oil with a built-in dark walnut stain to finish the project.
18. The project can be converted into a twin-sized sleeper sofa by removing the back cushions.