The video is about building a modern plywood platform bed, a relatively simple project that requires only straight line rips and cross cuts. The creator collaborated with Johnny Brooke from Crafted Workshop, and they worked on a tight deadline. They used a variety of tools, including a table saw, miter saw, drill, and sander.
The bed is made up of ten individual sections, five for the base and five for the platform, each consisting of multiple pieces of plywood cut to the same size and glued together. The platform pieces are designed to overhang by 7 inches, creating a giant finger joint.
The creators used a simple jig to make cutting repetitive pieces easier and a belt sander to smooth out any discrepancies. They also applied Johnson's paste wax to the joints to make assembly easier.
The final assembly involved putting the base pieces together using metal L-brackets, then adding the platform pieces and headboard. The slats were added last, holding everything together.
The video also touches on the benefits and drawbacks of working with a partner, including increased enjoyment of the process and a willingness to try new things, but potentially slower progress.
Here are the facts extracted from the text:
1. The speaker collaborated with Johnny Brooke from Crafted Workshop on a project to build a modern plywood platform bed.
2. The bed was designed to fit a full-sized mattress, but the dimensions can be adapted for any mattress size.
3. The project involved ripping plywood sheets into strips and cross-cutting them into individual pieces.
4. The speaker used a circular saw, speed square, drill, and sander to build the bed.
5. The bed is made up of ten individual sections: five for the base and five for the platform.
6. Each base section is a simple stack of four pieces of plywood, all cut to the same size and glued together.
7. The platform pieces are a series of four shorter pieces and four longer pieces, with the shorter pieces being 14 inches shorter than the long pieces.
8. The bed uses a giant finger joint to hold the platform pieces together.
9. The speaker used a belt sander to smooth out any discrepancies in the wood and make the pieces fit together more easily.
10. Johnson's paste wax was applied to the pieces to reduce friction and make assembly easier.
11. The bed was assembled using metal L-brackets on the inside corners of the front and straight brackets on the backside.
12. The headboard was attached to the base and platform pieces using screws.
13. The bed uses slats to support the mattress.
14. The speaker and Johnny Brooke built an LED light pattern into the headboard.
15. The headboard was built separately and is featured in another video on Johnny's channel, Crafted Workshop.
16. The speaker used PureBond plywood, a 3/4 inch maple variety, for the project.
17. PureBond plywood is made in America and is readily available at Home Depot.