The video shows a DIY project where the host transforms an old wall into a rustic, elegant, and beautiful surface. He uses various materials such as a diamond copy, hand polisher, sealant, and red stucco to achieve the desired effect. The host provides a step-by-step guide, starting with preparing the wall, applying the sealant, and then using a metal trowel to create a design that resembles rocks. He also adds a texture to the wall using a roller and good quality paint. The host notes that this type of texturing is highly valued and often used in luxury mansions. The project is completed in two days, and the host estimates that it costs between $8 to $10 per square meter, depending on the design and number of coats applied. He also shares tips and recommendations for viewers, including using masks and protective gear, and creating a rain cover or roof to protect the area. The video concludes with the host thanking his followers and encouraging them to subscribe, share, and like the video.
Here are the key facts extracted from the text:
1. The project involves transforming an old wall into a rustic but elegant design.
2. The materials used include a diamond copy, hand polisher, brush, helmet, and mask.
3. The wall must be dry before starting the project.
4. A vinyl sealant is used to protect the wall from humidity.
5. A roller and plastic tub are used to apply the sealant.
6. Water is added to the sealant in small quantities.
7. A metal trowel is used to apply a red stucco mixture to the wall.
8. The mixture is made with red dye, mineral powder, and water.
9. A stylus is used to create a design on the wall.
10. The design can be made to resemble rocks, cobblestones, or other patterns.
11. The project requires imagination and creativity.
12. The wall measures 1 meter 35 high by 3 meters 25 long, including the pillar.
13. The project was completed in two days with the help of Don Roberto Verdesoto.
14. A water sandpaper (Aja 120) is used to smooth out the surface.
15. A transparent acrylic sealant is applied to protect the design.
16. The sealant costs $5.50 and is available in stores.
17. The finished project is valued at $8-$10 per square meter, depending on the design and layers of sealant.
18. The project can be done on round pillars with moldings.
19. A 4-inch brush is used to apply the sealant to the entire area.
20. The smell of the materials can be strong, and masks should be worn.
21. A roller or pressure gun can be used to apply the sealant.
22. A rain cover or roof may be needed to protect the wall from rain.