The video tutorial demonstrates how to make a stylish front slit kurti from georgette fabric and lining fabric. The steps include:
1. Cutting out the lining and main fabric pieces, using measurements for the chest, waist, and length.
2. Creating the shape of the armholes and marking the neck and shoulder lines.
3. Cutting out the front and back pieces, then folding and cutting out the front armhole.
4. Preparing the back neck and attaching the lining to the main fabric.
5. Stitching the neck and shoulder seams, then cutting out the excess fabric.
6. Attaching a cross strip to the armhole and creating a collar using a separate piece of fabric.
7. Stitching the collar in place and turning it right side out.
8. Making small cuts near the collar and turning it to the front side.
9. Applying a topstitch to the collar and stitching it in place.
10. Marking and stitching the side seams, then folding and stitching the bottom hem.
11. Creating a slit in the front of the kurti and attaching a button and loops.
12. Stitching the sides and bottom hem in place, then applying a cover stitch to the waist fitting.
The tutorial provides detailed instructions and measurements for creating a stylish front slit kurti with a collar and slit in the front.
Here are the key facts from the text:
1. Three meters of georgette fabric and 1 meter of lining fabric are used to make the kurti.
2. The lining fabric is placed in four parts with one joined side and one open side.
3. The top is 15 inches plus 1 inch for the sewing margin, totaling 16 inches.
4. Half of the shoulder is 7.5 inches.
5. The fourth part of the chest is taken as 36.
6. The fourth part of the waist plus 1 inch extra is taken as 8 inches.
7. The stopper clip is added, making the total 9 inches.
8. The waist is marked at 9 inches.
9. The shape of the arm hole is grown from the bottom.
10. The back arm hole is started, and the front arm hole is grown another half inch from inside.
11. A high neck is made, and the width of the neck is taken as 3 inches.
12. The shoulder is joined, and the neck depth is taken as 1 inch.
13. The back neck depth is kept at 1 inch.
14. The marking is cut from the back neck.
15. The front and back parts are separated, and the front arm hole is cut.
16. The cutting is done on the main fabric.
17. The lining is placed on the main fabric, and the shape of the arm hole is grown.
18. The shape of the arm hole is cut, and the excess fabric is removed.
19. The lining is stitched on the inside.
20. A block is made, and the arm hole is grown.
21. The arm hole is cut, and the excess fabric is removed.
22. The shape of the arm hole is grown from the bottom.
23. The arm hole is cut, and the excess fabric is removed.
24. The top is stitched on the top side of the neck.
25. The neck is joined, and the shoulder is stitched.
26. The front part is kept on the back part, and both sides have to be kept inside.
27. The shoulder joint is made, and the arm hole is prepared.
28. A cross strip is attached to the arm hole.
29. The strip is folded, and a margin of half an inch is kept.
30. The strip is attached to the arm hole, and small cuts are made near the collar.
31. The collar is made, and its length is taken as 42 inches.
32. The waist is marked at 9 inches.
33. The bottom part is cut, and the excess fabric is removed.
34. The front and back parts are separated, and the front part is folded again.
35. The front part is cut from the center, and the excess fabric is removed.
36. The back part is prepared, and the front part is placed on it.
37. The sides are marked, and a margin of half an inch is kept.
38. The sides are cut, and the excess fabric is removed.
39. The shoulder is joined, and the arm hole is prepared.
40. The arm hole is cut, and the excess fabric is removed.
41. The top is stitched on the top side of the neck.
42. The neck is joined, and the shoulder is stitched.
43. The front part is kept on the back part, and both sides have to be kept inside.
44. The shoulder joint is made, and the arm hole is prepared.
45. A cross strip is attached to the arm hole.
46. The strip is folded, and a margin of half an inch is kept.
47. The strip is attached to the arm hole, and small cuts are made near the collar.
48. The sides are marked, and a margin of half an inch is kept.
49. The sides are cut, and the excess fabric is removed.
50. The shoulder is joined, and the arm hole is prepared.
51. The arm hole is cut, and the excess fabric is removed.
52. The top is stitched on the top side of the neck.
53. The neck is joined, and the shoulder is stitched.
54. The front part is kept on the back part, and both sides have to be kept inside.
55. The shoulder joint is made, and the arm hole is prepared.
56. A cross strip is attached to the arm hole.
57. The strip is folded, and a margin of half an inch is kept.
58. The strip is attached to the arm hole, and small cuts are made near the collar.
59. The sides are marked, and a margin of half an inch is kept.
60. The sides are cut, and the excess fabric is removed.
61. The bottom part is cut, and the excess fabric is removed.
62. The front and back parts are separated, and the front part is folded again.
63. The front part is cut from the center, and the excess fabric is removed.
64. The back part is prepared, and the front part is placed on it.
65. The sides are marked, and a margin of half an inch is kept.
66. The sides are cut, and the excess fabric is removed.
67. The shoulder is joined, and the arm hole is prepared.
68. The arm hole is cut, and the excess fabric is removed.
69. The collar is made, and its length is taken as 42 inches.
70. The waist is marked at 9 inches.
71. The bottom part is cut, and the excess fabric is removed.
72. The front and back parts are separated, and the front part is folded again.
73. The front part is cut from the center, and the excess fabric is removed.
74. The back part is prepared, and the front part is placed on it.
75. The sides are marked, and a margin of half an inch is kept.
76. The sides are cut, and the excess fabric is removed.
77. The shoulder is joined, and the arm hole is prepared.
78. The arm hole is cut, and the excess fabric is removed.
79. The top is stitched on the top side of the neck.
80. The neck is joined, and the shoulder is stitched.
81. The front part is kept on the back part, and both sides have to be kept inside.
82. The shoulder joint is made, and the arm hole is prepared.
83. A cross strip is attached to the arm hole.
84. The strip is folded, and a margin of half an inch is kept.
85. The strip is attached to the arm hole, and small cuts are made near the collar.
86. The collar is made, and its length is taken as 42 inches.
87. The waist is marked at 9 inches.
88. The bottom part is cut, and the excess fabric is removed.
89. The front and back parts are separated, and the front part is folded again.
90. The front part is cut from the center, and the excess fabric is removed.
91. The back part is prepared, and the front part is placed on it.
92. The sides are marked, and a margin of half an inch is kept.
93. The sides are cut, and the excess fabric is removed.
94. The shoulder is joined, and the arm hole is prepared.
95. The arm hole is cut, and the excess fabric is removed.
96. The top is stitched on the top side of the neck.
97. The neck is joined, and the shoulder is stitched.
98. The front part is kept on the back part, and both sides have to be kept inside.
99. The shoulder joint is made, and the arm hole is prepared.
100. A cross strip is attached to the arm hole.
Note: These facts are based on the provided text and may not be comprehensive or accurate, as the text appears to be a transcription of a video or audio recording.