Brad Rodriguez shares five methods to print on wood, including four DIY techniques and one using a CNC laser. The methods are:
1. **Acetone Transfer**: A quick and cheap method that uses acetone to transfer toner from a laser print to wood. Results are decent, but picture quality can be affected by dark text.
2. **Clothes Iron Method**: A simple method that uses heat to transfer toner from a laser print to wood. However, picture quality is not great, and there's a risk of burning the wood or scorching the iron.
3. **Water-Based Polyurethane**: A method that uses polyurethane to transfer the image. Results are excellent, with great image quality and dark tones.
4. **Acrylic Gel Medium**: A method that uses a gel medium to transfer the image. Results are great, but the process can be messy, and it's hard to remove the paper.
5. **CNC Laser**: A non-DIY method that uses a laser to engrave the image onto the wood. Results are accurate and precise, but the equipment is expensive.
After applying a finish to each method, Brad concludes that the polyurethane method is his favorite, followed by the gel medium and acetone transfer methods. The clothes iron method is the least effective, and the CNC laser method produces a unique, burned wood look.
Here are the key facts extracted from the text:
1. The author, Brad Rodriguez, is demonstrating five different ways to print on wood.
2. The five methods are: acetone, clothes iron, water-based polyurethane, acrylic gel medium, and using a CNC laser.
3. The author uses a laser printer to print out images for each method.
4. The author applies the image to the wood using a mirror image printout.
5. The first method, acetone, involves applying acetone to the back of the printout and then pressing it onto the wood.
6. The second method, clothes iron, involves using a hot iron to transfer the image from the printout to the wood.
7. The third method, water-based polyurethane, involves applying polyurethane to the wood and then pressing the printout onto it.
8. The fourth method, acrylic gel medium, involves applying a gel medium to the wood and then pressing the printout onto it.
9. The fifth method, CNC laser, involves using a laser to engrave the image directly onto the wood.
10. The author compares the results of each method, noting the pros and cons of each.
11. The author notes that the polyurethane method produces the best results, with the gel medium method being a close second.
12. The author also notes that the CNC laser method produces high-quality results, but is more expensive.
13. The author applies a finish to each of the printed woods to see how it affects the appearance.
14. The author's opinion on the methods changes after applying the finish, with the polyurethane method still being the top choice.
15. The author notes that the gel medium method requires more effort and produces a less smooth finish.
16. The author suggests that the CNC laser method produces a unique "burnt wood" look.
17. The author encourages viewers to subscribe to their channel and to try out the different methods for themselves.