A DIY enthusiast creates a workshop machine using a 20x40 profile pipe as the foundation. They cut and weld the pipe to create the machine's frame, adding a tabletop and a thrust plate. The creator also makes a support for the tabletop using two pieces of angle metal and adds a lever and tensioning mechanism.
They use a laser-cut plywood to create pulleys and add a washing machine motor, which they connect to the machine's belt system. The creator also adds a regulator, bearings, and a switch.
After assembling the machine, they test it using various materials, including a kiran, scissors, and a pin. The machine appears to work well, but the creator notes that a barrel-shaped roller may be necessary to improve its performance.
Throughout the video, the creator shares tips and recommendations for DIY projects, including using Aliexpress to purchase materials and a extension to help with shopping on the platform.
Here are the key facts extracted from the text:
1. The project involves building a workshop machine using a 20 by 40 profile pipe as the foundation.
2. The pipe is cut into sections and laid out to be welded together.
3. The machine has a tabletop made from two pieces of an angle.
4. The tabletop is fixed to the pipe using magnets and welding.
5. The machine has a lever made from a piece of metal with a hole.
6. The lever is connected to a bolt and nut, which is used to tension the machine.
7. The machine uses a washing machine motor with a collector type design.
8. The motor has a power rating of 480 watts and a speed of 14,000 rpm.
9. The machine has a pulley system made from plywood.
10. The pulley system requires processing with sandpaper.
11. A nuclear spring is used to create a hook for the machine.
12. The machine has a regulator that controls the speed of the motor.
13. The regulator is connected to a switch and a power source.
14. The machine has a tension roller made from a piece of metal with a hole.
15. The tension roller is connected to a bolt and nut, which is used to tension the machine.
16. The machine is designed to sharpen knives and scissors.
17. The machine uses a sharpening stone and a grinding wheel.
18. A fabric backing pad and glue are used to attach the sharpening stone to the machine.
19. The machine has a section of profile pipe that is sanded to create a smooth surface.
20. The machine is painted to protect it from rust.
21. The machine has a grinder attachment that can be used to grind metal.
22. The machine has a maximum load capacity that is not specified.
23. The machine is demonstrated to sharpen a pencil and a knife.
24. The machine has a Instagram account where the creator shares updates and behind-the-scenes content.