The video is a tutorial on how to lay ceramic flooring step by step. The host, Fernando, starts by preparing the room and aligning the floor. He then mixes the mortar and applies it to the floor, using a notched trowel to spread it evenly. He places the first piece of ceramic tile in the corner, making sure it is level and aligned with the wall. He uses a rubber mallet to tap the tile into place and ensures it is secure.
Fernando then continues to lay the tiles, using spacers to maintain even gaps between them. He cuts the tiles to fit around the edges of the room and uses a video scribe to make precise cuts. Once all the tiles are laid, he uses a grout to fill in the gaps between them.
After the grout has dried, Fernando uses a sponge to remove any excess grout from the surface of the tiles. He then finishes the job by installing skirting boards, using the same mortar and grout to secure them in place.
Throughout the video, Fernando provides tips and tricks for achieving a professional-looking finish, including using the right tools and materials, and following a step-by-step process. He also encourages viewers to share the video with their friends and to subscribe to his channel for more DIY tutorials.
Here are the key facts extracted from the text:
1. The video is about laying ceramic tiles in a bedroom.
2. The ceramic tiles used are wood-style and look like laminate flooring.
3. The procedure for laying the tiles is the same for any type of ceramic floor.
4. The tiles have a specific pattern that needs to be followed when laying them.
5. The tiles have a certain mark at the bottom that indicates how they were manufactured and printed.
6. AC1 mortar is used for internal environments, while AS2 mortar is recommended for external environments.
7. A notched trowel is used to spread the mortar and adjust the tiles.
8. Spacers are used to maintain even spacing between the tiles.
9. The tiles are cut using a video scribe or a Makita saw.
10. The skirting boards are installed using the same mortar and procedure as the tiles.
11. The grout is mixed with water and applied to the tiles using a spatula or slippers.
12. PVC hard is added to the grout to prevent it from failing.
13. The excess grout is removed using a sponge and dish soap.
14. The floor is finished with a smooth finish and is ready to use once the grout is dry.